Category Archives: article

(1), the general bag filter bag filter compartment structure, and the left margin in the design. Filter compartment can be rotated maintenance, without affecting the operation of the boiler. Therefore, the impact on the availability of boiler equipment close to zero. (2), baghouse dust discharged from the concentration ratio of the nature of the resistance, […]

The first is dust-proof, dust-free power. Such as loading and unloading, plus a chute transport belt, it can greatly reduce the amount of dust, soot processing; when handling bulk materials should be used locally confined, that the resulting dust, soot cycle in which the kinetic energy consumption after it, dust basically natural settling down. Such […]

Air box pulse bag dust collector and advantages of sub-room cleaning pulse jet bag filter as a whole, to overcome the lack of sub-room cleaning the cleaning ability, defect injection cleaning and filtering the same time, expanding the bag ESP range of applications, not only can purify general dusty gas inlet concentration can handle up […]

1. A variety of flue gas of industrial furnaces, dryers, etc. are all high temperature flue gas, most of which also contains a lot of water and sulfur oxide gases are. Baghouse is currently capable of handling flue gas temperature below 300 ℃, the temperature exceeds the pre-cooling process to deal with the flue gas, […]

1, the temperature for the baghouse, its temperature depends on two factors, the first is the media’s maximum temperature, and the second is the gas temperature must be above the dew point. For bag filter, the use of temperature and dust removal efficiency relationship is not obvious, it is different from the electrostatic precipitator of […]

Since the explosive used in the case of explosive dust so the operation of such dust on the filter is different from the ordinary, here we introduce in the operation should be explosion-proof bag filter attention to what matters. ① explosion-proof bag filter running, do not open Manhole, cover, poke holes and other materials, if […]

(1) mechanical vibration bag filter class is the use of mechanical devices (including manual, electromagnetic vibration and pneumatic) of the bag to produce vibration cleaning bag filter. Such dust is characterized by kinetic energy applied to the layer of dust and less frequently, thus requiring filter thin and smooth, soft texture, is conducive to the […]

Daily operations In the daily operation of the bag filter, since the operating conditions, certain changes occur, or some failure, will affect the normal operation of equipment status and performance, should be regularly inspected and appropriate regulatory purpose is to extend filter bag life, lower power consumption and recovery of useful materials. Attention problems are: […]

Commissioning In the new baghouse commissioning, should pay particular attention to check the following points: 1, the direction of rotation of the fan, speed, vibration and bearing temperature. 2, the air volume and pressure for each test point and the temperature is consistent with the design. 3, installation of the filter bag after use if […]