Cloth bag filter and accessories choice

The first is dust-proof, dust-free power. Such as loading and unloading, plus a chute transport belt, it can greatly reduce the amount of dust, soot processing; when handling bulk materials should be used locally confined, that the resulting dust, soot cycle in which the kinetic energy consumption after it, dust basically natural settling down. Such mechanical dust removal accessories in a foreign country is called non-powered dust in most places are suitable for non-powered dust; or the use of non-powered dust pretreatment first, prevention is always better than treatment cost-effective. The second is the use of an auxiliary water mist, or foam dust. Sprayed directly on the one hand for the flue gas temperature is relatively high, the direct evaporative cooling spray can with a small amount of water to cool the flue gas, the volume shrinkage rate is also conducive to reducing dust. On the other hand can make after wetting dust particles, bonded to each other, unite, grow up, and then it is easy to separate from the atmosphere; so from conservation, but also reduce the cost of energy-saving point of view, we must first consider non-powered dust and direct spray dust. The third is the ventilation and dust removal. Esen consider using a low energy ventilation and dust removal system ESP, and finally consider the bag filter. The vast majority of almost using ventilation and dust, and dust with accessories, appeared to solve the emissions problem, but operating costs are high. Of course, some practical problems in dust removal efficiency unstable parts also must be addressed.