Air filter cleaning method

With the advancement of technology and the rapid development of industry, the air filter has been more and more well known, then the middle and high efficiency filter cleaning procedures are what? Cleaning appliances, cleaning conditions, as well as what the content of the plot, Here we come together with Jie good filter understanding of these common problems to solve it. Jie good filter to remind our customers, for air filter cleaning, the main cleaning equipment is a slot, cloth, detergent and stainless steel frame. Cleaning conditions of early, medium-efficiency filter end resistance is greater than the initial resistance of 2 times. For the filter surface is not very dirty, the filter to get outdoor with clean compressed air double-sided purging, purging to see the light in the eyes of dust particles only. When the surface of the filter is dirty, it is necessary to rinse it. In the general area of the water room (air-conditioned room) with the slot into the water of about 100 pounds of reference, the 1 kg bottle of detergent diluted, the filter into the tank to be submerged in the water. Rinse a number of times, to no pollution, *** rinse with water until the water clear up, remove the stainless steel grille to drag the dry water, and then tiled on the shelf on the dry, Liangshuang to double-sided ground to Speed up the drying rate. For the cleaning of the surface of the unit, every day with a rag on the outer surface of the air conditioning box and ancillary pipelines, instruments for a comprehensive clean, making the equipment clean and bright. The equipment on the oil, rubber class to use wiping cloth rinse wipe clean, and then wipe clean drinking water, leaving no trace. For the internal cleaning of the air-conditioning system, replace the fan, siding, cooler, heater and diffuser plate thoroughly after cleaning the filter and wipe the dirt, dust and grease. Left corner, and then install the initial effect and in effect filter. Clean good filter to remind the majority of users, the air filter should be cleaned once every half of the internal system is appropriate, first with a wet cloth to wipe the inside, then dry cleaning cloth to conduct a comprehensive. High efficiency filter should be wiped three times, wipe immediately after the installation of high efficiency filter, the installation should be installed in the four-box filter and the surrounding wipe clean with a wet clean cloth, high efficiency filter should be unboxing in the field, and After the inspection is qualified, install immediately to prevent dust from falling into the high efficiency filter.