How to select and install linear shaker screen

Linear Vibrating Screen (line screen) is a new high-yield vibrating screening equipment, screening with a high yield, high precision, simple structure and easy maintenance. Linear shaker screen selection and installation of the equipment has a line screen .. Linear Vibrating Screen (line screen) is a new high-yield vibrating screening equipment, screening with a high yield, high precision, simple structure and easy maintenance. Linear shaker screen selection and installation of the line screen device has a very important meaning, choose the most suitable screen to install the correct method in accordance with the positive, can effectively improve the line screen equipment performance and extend the life of linear vibrating screen, This article gives you a straight line screen mesh selection and installation method detailed analysis. First, choose the most suitable linear mesh sieve 1, the linear shaker screen installation is relatively complicated, so choose wire diameter coarse sieve; 2, when cutting the screen, the screen width should pay attention to maintaining consistent grid, grid length shall grow than 50-70mm. Second, install linear mesh sieve 1, due to the tightness up screen will directly affect the linear sieve screening efficiency, so when you install the screen straight-line screen, the screen must be tensioner; 2 is to be determined in accordance with the installation of rubber balls clear net mesh sieve and the difficulty of screening material, should not blind chaos means; 3, higher sieve size or larger proportion of the material, should be installed in the following screen mesh suitable care networks (care network is mainly played a supporting role, can effectively reduce the pressure on the material on the screen, extend the screen life); 4, in order to avoid mixing phenomenon, linear mesh frame are certain requirements according to the screen box assembly, it will grow mesh inserted into the corresponding discharge port; 5, when the plate is installed, it should pay attention to maintaining the flatness of the plate, and lined with strong scalability with uniform locking seal sponge, which is the key to prevent the occurrence of mixed-level, but also an important factor in the impact of screen life; 6, linear shaker screen press installation requirements, must first use a small amount of material on the straight-line screen cloth and screening test case, even ahead of material conveying, classification accuracy, no mixing phenomenon, the line screen can be put into use, On the other hand, there material deviation, polyethylene and other heap uneven, adjust line screen mesh surface flatness, uniformity. In case of material mixed-level phenomenon, should check whether the screen and pressing the seal.