Category Archives: FAQ

Q: What need to notice when using the belt filter press? A: ① Correctly measure the length of the filter cloth (including joint length). ② Ensure at the suture ends the parallel or coincidence of weft to prevent deviation. ③ Notice the operating direction. Arrows indicating the direction to the running direction. cheap nfl jerseys It […]

Q:How is the structure of baghouse ? A:1. filter bag, cage and flowers bone plate —– bag and cage form the bone ash precipitator filtration system ; flowers board for supporting the bag assembly and the partition of the filter chamber ( dust segment ) and net gas chamber and as a maintenance platform dust […]

Q: How to extend the service life of filter press cloth? A: 1. The cloth should not hang too loose or too tight, too loose easily dust, tight easy to pull broken. 2. Old and new bag should not be mixed , to avoid normal operation. 3. After replace the bag , first with compressed air blowing, […]

Q:How is the process of Baghouse skeleton silicone  ? A:Bag cage silicone spray process in detail 1 would have been processed in addition to fuel tank bag cage was immersed for 15 minutes in order to remove surface oil bag cage. 2. Remove from the oil tank into the bag cage cleaning bath to soak […]

Q:How to judge the quality of the filter bag cage? A:As a baghouse cage,  due to ease of installation and maintenance, use and testing it in the bag filter, people often ignore to it. But the dust cage is a direct impact on the quality of life of the baghouse. Therefore, in the framework of the […]

Q: What is the elongation of filter press cloth? A: After absorption liquid, fiber and yarn will stretch diameter and increase the length of the fiber, it will cause a change in the size of the cloth, giving assembly filter plates  serious consequences. Various material cloths, water absorption rates are different. Some cloth absorb water of 4% by […]

Q:What are the features of the filter cartridge? A:1 , greatly increase the effective filtration area ; 2, to ensure a smooth and low pressure , improve circulation wind ; 3 , cartridge element compact, easy to install ; 4 , especially for large dust concentration industry . cheap jerseys ” Zimmerman explained in an […]

Q: How to do for the pre-shrinkage of filter press cloth? A: (1) Filter press cloth in a relaxed state, was pre-contracted with boiling water; (2) Filter press cloth in the weft yarn tension,  was heated in a thermostat (keepng porosity, permeability). cheap jerseys To find a company that does this, sometimes it can be hard to get the money […]

Q:Why cannot pull out the filter bag cage? A: 1.Heat shrinkable bags , the length of time to see if you use a very short time to spare the heat setting legend bag did not do . 2. Galvanized cage or cage surface of silicone is false , not high temperature melt , causing sticking to the […]

Q: What is pre-shrink of filter press cloth? A: For frame filter plate, filter press cloth’s shrink can lead to serious problems. And reuse the filter cloth, wash and dry, will aggravate its shrink. In order to ensure the dimensional stability of the cloth at work, filter cloth should be pre-shrinked. Only with pre-shrinkage, it will keep a stable dimension, then […]