Category Archives: FAQ

Q: What’s the operating conditions of polyester felt? A: Applicable industries: cement (raw material, raw mill, packaging, transport links), smelter (sintering machine, continuous casting), mining (collect limestone powder), the amount of colored plant (alumina transport, aluminum), furniture (polish workshop), food processing, pharmaceutical and other industries of the dust collection. Applicable conditions: suitable for continuous temperature of […]

Q: What’s the operating conditions of fiberglass filter cloth? A: It is widely used in steel, power, metallurgy, chemical industry, environmental protection, cement and other industries dust filter air. Use conditions Long-term use of 200 ℃ -280 ℃, the optimum temperature 90 ℃ -220 ℃, FCA formula working temperature should be less than 180 ℃; filtration […]

Q: What’s the application of fiberglass needle felt? A: Fiberglass needle felt can be used in the automobile industry in sound insulation, sound absorption, shock absorption, flame retardant, mainly used in industrial field of filtration; high temperature gas filtration; glass fiber needle felt is widely used in carbon black, iron and steel, nonferrous metals metals, chemicals, burning and […]

Q: What’s advantages of fiberglass felt? A: It not only has a fiberglass fabric temperature, corrosion resistance, dimensional stability, elongation minimal shrinkage, high strength advantage, and carpet fibers showed a single fiber, three-dimensional microporous structure, high porosity, gas filtration resistance, It is a relatively high speed, high temperature filter material. Compared with other high-temperature fiber mat, […]

Q: What need to notice for bag filter? A: 1.The cloth should not hang too loose or too tight, too loose easily dust, tight easy to pull bad. 2. The bag should not mix old and new, at different times to avoid damage to affect normal operation. 3. Replace the bag down, first blowing with compressed air, and […]

Q: What need to notice for disc filter? A: 1. The choice of filter cloth should not be too thick, too thick is not conducive to sew the bag when installed. 2. Cloth surface selected should not be too smooth, too smooth, not cake formation and productivity. cheap nfl jerseys According to federal prosecutors and court records, Cosmopolus […]

Q: What need to notice for vertical belt filter? A: 1. Requires a certain thickness of the filter cloth and strong anti-tensile strength. 2. To ensure that both ends of the joint or parallel weft coincidence, when the operation of the filter cloth to prevent deviation occurs. 3. The operation of the interface should be noted that the direction of […]

Q: What need to notice for belt filter? A: 1. correctly measure the length of the filter cloth (including joint length). 2. Ensure that both ends of the suture latitude coincident or parallel, to prevent the operation of the filter cloth when deviation occurs. 3. The operation of the interface should be noted that the direction of the blade […]

Q: What need to notice for filter press cloth? A: 1. The installation of filter cloth, filter cloth should ensure that the sub-frame and a fixed level, so as to avoid damage to the filter cloth filter cloth discounts at frame compression. 2. The filter cake adhering to the filter cloth of time not too long, for too […]

Q: What’s the difference between heat-resistance and high-temperature conveyor belt? A: Heat-resistance conveyor belt is a multi-layer rubber cotton canvas (cotton cloth) or polyester canvas top to bottom covered with a high temperature or heat resistant rubbers, high temperature vulcanization bonded together, suitable for handling 175 ℃ less heat coke, cement, clinker and hot castings. […]