Category Archives: article

1) All filter installation inside and outside jobs, welding jobs, painting jobs can be loaded after the dust bag. 2) Mounted around the bag and the bag cage to be thoroughly cleaned, flower plate hole may not have glitches. 3) When loading pay special attention to fire safety bag, moisture can not damage the bag, […]

Trapped in the dust bag on the outer surface of the bag can cause permeability reduction, so that bag filter resistance increased, the high-pressure gas injection into the tube from the moment the air bag, and high-speed ejection from the blow hole. High-speed air stream is injected into the bag several times will produce a […]

1. Off the heat of the good: According to the physical principles, the thermal conductivity of the gas is small, excellent heat insulation material has a lot of internal air pockets. The glass fiber cotton acupuncture has numerous small gas and irregular arrangement of fibers for excellent insulation materials, thermal conductivity 0.2 ~ 0.040kcal / mhr. […]

(1) cleaning time is short, the cleaning cycle is too long, the dust on the bag could not be cleaned, the dust on the filter into the state, will make the running resistance soon increased. For pulse jet bag filter, the cleaning process takes time (ie, pulse valve injection time) for the cleaning time, adjustable […]

Dust filter bag cage is the key to cleaning, cleaning effect determines the success or failure of the entire system and dust removal equipment, and therefore characterized by a strong cleaning dust skeleton as the preferred device. Taken in the past or bolt lashing compacted solid bag method, there is a leak interfaces bag, dust bag […]

EAF flue gas produced has the following characteristics First, complex composition, containing a flammable explosive gas C0; the second is the flue gas temperature is high, large fluctuations, temperature range of 1200 ℃ ~ 1600 ℃; Third soot complex composition, containing a metal oxide, carbon particles; fourth is fine soot particles, the average particle size […]

Abstract: First, understand the flue gas temperature to be addressed: bag filter bag as a core member. The selected filter can not adapt to the flue gas temperature is very important. Such as filter normal temperature flue gas temperature exceeds too much, because the high cost of high-temperature filter material resulting in increased investment in […]

1. Heat resistance: having a melting point of 285 ℃, it is particularly long-term heat resistance, can be used continuously at a temperature of 190 ℃ and highly resistant to steam heat; even in high pressure steam of 160 ℃ in It can maintain a 90% strength. 2. Singeing calendering treatment can achieve easy cleaning effect. […]

The basic structure of filter body consists of five parts. Air guide system: intake manifold includes a central baffle; gas system: includes an exhaust pipe to enhance the switching valve; blowing system include: cleaning fan, reverse air tube to enhance the switching valve; The main structure: Includes hopper, a cylindrical body, a flower plates, bags, […]

1. Before use must first check whether the inlet and outlet piping has been installed properly, and the inlet and outlet pipe fixed groove Fortunately, making entrance difficult to swing. 2. Open the exhaust valve before prescribing valve, the water from the dosing valve into the tank by dosing pump and the inlet pipe, so […]