The correct weave is a very important factor in the selection of filter media. Satin weaves generally offer the best cake release. They do not blind readily and have fair abrasion resistance, but poor particle retention. Twill weaves provide good resilience and resistance to abrasion. The increased surface area of twill fabric delivers good drainage and […]

Spun fabrics are produced by yarns that are made up of short staple fiber. All natural fabrics such as cotton and wool will always be spun fabrics as we’re unable to produce natural fabrics in continuous filament. Synthetic fabrics such as polyester, polypropylene, nylon, corder, etc., can be produced in staple or spun fabric form. […]

We produce combination fabrics to achieve special affects which we need in combination from two different styles of fabric. For example, we produce combination monofilament and multifilament fabrics because we want the efficiency of the multifilament fabric, but we want the release and slick surface characteristic of a monofilament fabric. We see many times in […]

The most versatile and consistently efficient equipment for liquid-solid separation is the fabric filter. The media used for filtering is the heart of the total system and is a major factor in determining the efficiency of the system and the cost of its operation. Four factors must be considered in proper filter media selection – […]

Proper yarn selection is critical in the design of filtration fabrics as both the warp and fill yarns contribute specific properties to the filter fabric. Both yarns must be compatible for optimum cover uniformity producing a quality defect free fabric which when finished will be stable and uniform in filter efficiency as well as flow […]

After weaving a “greige” fabric composed of the optimum weave and yarn combinations for an intended application, proper finishing is critical for this fabric to perform in the filter. In woven fabrics, both the warp and fill yarns are placed under extreme tension and will remain that way until they are finished. The finishing process […]

Glass fiber can effectively separate from the diameter of 50 – 0.01μm ranging from pollutants in the filter when it is neither necessary to absorb or absorb, but the effect is very obvious, more quality than other materials.

In general, the filter filter is composed of fiber, filter, sponge and other information on the air in the solid, liquid particles after interception, will cohesion in the filter surface, followed by the role of gravity precipitation to the bottom of the device, And finally through the drain operation or manual discharge.

Compressed air filter is to filter compressed air, a device of purification, generally refers to the air system in the highly efficient precision filter.

No, because even in the most ideal operating conditions, this type of compressor will occur not less than 0.5ppmW / W hydrocarbons, if the accounting in accordance with the 100scfm gas, the monthly will occur more than 15ml of vaporization Condensate.