1, high efficiency filter Mechanical seal, the use of gasket material, the thickness of 6 ~ 8mm, and positioning paste in the filter frame, after installation of the litter compression should be uniform, the compression rate of 25% to 50%; 2, the use of tank sealing, the groove rack installation should be level, no leakage […]

Due to high temperature and high efficiency filter used in the organic silica gel and inorganic glue curing process is from the surface inward curing, injection glue height thicker, more difficult to cure, under normal circumstances glue curing time for 3-7 days, if not completely Curing high temperature and high efficiency filter directly into the […]

The use of 250 ℃ high temperature resistance of red and high temperature silicone rubber 350-400 ℃ black high temperature inorganic glue due to the impact of physical properties of the glue (fluidity too bad), so 250 ℃ H13 high efficiency filter H12-H13 high efficiency between the actual filtration; 350-400 ℃ H13 high temperature and […]

For a long time, people on the circulating cooling water treatment are not very seriously. Is generally believed that the circulating cooling water is only a simple dosing treatment, and through the sewage, add fresh water, to avoid corrosion, scaling and the breeding of micro-organisms on it. However, in fact, the treatment of circulating cooling […]

At present, the open-loop cooling water treatment mainly by dosing method, that is, adding cooling water to the circulating dispersant, corrosion inhibitors, sterilization and algae in order to achieve the prevention of scaling, metal corrosion and microbial breeding purposes. This method has a certain effect, but a large amount of long-term dosage, resulting in environmental […]

The long-term use of cooling water, will inevitably bring sediment deposition, metal corrosion and microbial breeding of these three issues, circulating cooling water treatment is by bypass flow filtration, softening treatment and dosing treatment to solve these problems. Has the following advantages: 1, stable production, safe operation; 2, to save water resources; if the doubling […]

High efficiency fiber filter is an advanced structure, excellent performance of the filtration equipment. It uses advanced technology to successfully solve the fiber filter in the process of filtering and cleaning problems. Better play the fiber filter material expertise, to achieve the ideal deep filter effect. Efficient fiber filtration technology, it successfully resolved the existence […]

1) Airflow velocity is reduced to the minimum. 2) resistance up to 2 times the initial resistance 3) there can not repair the leakage.

1, to keep the device environment cleaning, cleaning equipment before the ventilation pipe, the pipe inside the garbage, dust, rust and other clean-up; 2, the device must be unpacked in the field before the packaging, the appearance of inspection, check the contents of the filter paper, sealant and frame for damage; side length, diagonal and […]

High efficiency filter test method Before the air volume test, the fan must first check whether the normal operation, the system components are installed correctly, with or without obstacles (such as whether the filter has been blocked, block), all valves should be fixed in a certain open position , And must be measured to measure […]