Pulse bag filter Introduction

Pulse bag filter in the bag by bag cage fixed to the orifice flowers to remove surface dust filter bag, which is in turn regularly using compressed air to blow within each row of filter bag, pulse bag filter is continuous type apparatus First, the pulse bag filter bag cage is fixed by the bag in the flower plates to remove surface dust filter bag, it is the use of compressed air on a regular basis within each row to turn the bag blowing, pulse bag dust It is a continuous-duty equipment, and corresponding to the center of each dust bag, dramatic expansion of the bag, the controller periodically emits short pulses, electromagnetic pulse valve is connected with the stingy package, so stick to the outer surface of the bag inhalation of dust inside the bag purged down, and finally discharged through discharge, take turns to give each row bag cleaning, sweep down dust falls within the lower housing a collection hopper, pulse bag filter structure type and working principle and the principle structure type pulse bag filter (MC type) is the reverse airflow cleaning outside one kind of filter dust collector, bag filter pulse than the average bag filter cleaning ability, to be a cycle, high-speed the formation of air around the equivalent of 5 to 7 times its own volume of induced flow, began to turn again. Small 6.4mm diameter orifice tube on the pulse jet baghouse. Filtered air flow and cause the opposite effect reverse airflow cleaning and vibration, the upper row of each bag is equipped with an injection tube. Together with the venturi passage into the bag, resulting in reverse airflow inside-out,, high-pressure air from the injection hole is ejected at high speed, when the dust bag through the air vents exhaust gas, dust and gas from the feed into the air bag equipped with a number of central cabinets and orderly control of each pulse valve is opened by the control valve. When the valve is opened when a pulse (just 0.1 ~ 0.12s), pulse valve injection tube equipped with front air compressor is connected to the injection tube and the air bag and pulse valve connected to the communication. You can maintain a high filtration velocity.