article

FILTER CLOTH REPLACEMENT

Posted on by shengjie

FILTER CLOTH REPLACEMENT

There are three different kinds of cloths on a filter press: the head cloth, which is for the first plate and is a single cloth with a hole in the center; the tail cloth, which is for the last plate and is also a single cloth but with NO HOLE in the center; and the intermediate cloths, which are all the cloths on the plates between the head and the tail. These cloths are double cloths, with one cloth on each side of each plate, and the hole in the center of each side is connected by a short cloth tube.

HEAD CLOTH REPLACEMENT

  • All of the plates can be removed from the filter press with the exception of head plate; therefore, remove plates as necessary to provide sufficient access to the head plate.
  • Using a spanner wrench, remove the center cloth nut from the cloth side of the head plate, while leaving the center feed mounting nut, located behind the cloth, in place.
  • Taking care not to damage the plastic plate, insert a thin bladed screw driver into the groove at the outer edge of the filter cloth and pry a small section of the cloth out of the groove, or if the cloths are not to be reused, cut a ~6” slit into the cloth about 1” away from one of the corners.
  • Grab the exposed cloth from step 3 with vise grip pliers or equivalent, and pull the remaining cloth out of the groove.
  • Inspect and remove any accumulated solids from the groove.
  • Aliening the new cloth into position by lining up the corners of the cloth to the corners of the plate, and reinstall the spanner nut.
  • Using the cloth installation tool, pound the sewn-in bead or caulk of the filter cloth into the groove of the filter press plate. Ensure that the caulk has been fully seated to the bottom of the groove. Advance around the groove pounding in about 2” to 3” at a time.

TAIL CLOTH REPLACEMENT

  • Taking care not to damage the plastic plate, insert a thin bladed screw driver into the groove at the outer edge of the filter cloth and pry a small section of the cloth out of the groove, or if the cloths are not to be reused, cut a ~6” slit into the cloth about 1” away from one of the corners of the cloth.
  • Grab the exposed cloth from step 1 with vise grip pliers or equivalent, and pull the remaining cloth out of the groove.
  • Inspect and remove any accumulated solids from the groove.
  • Aliening the new cloth into position by lining up the corners of the cloth to the corners of the plate.
  • Using the cloth installation tool, pound the sewn-in bead or caulk of the filter cloth, into the groove of the filter press plate. Ensure that the caulk has been fully seated to the bottom of the groove. Advance around the groove by pounding in about 2” to 3” at a time.

INTERMEDIATE CLOTH REPLACEMENT

  • Taking care not to damage the plastic plate, insert a thin bladed screw driver into the one of the grooves at the outer edge of the filter cloth and pry a small section of the cloth out of the groove, or if the cloths are not to be reused, cut a ~6” slit into the cloth about 1” away from one of the corners of the cloth.
  • Repeat step 1 to the other groove on the other side of the filter plate.
  • Grab the exposed cloth from step 1 with vise grip pliers or equivalent, and pull the remaining cloth out of the groove.
  • Repeat step 3 to the other side of the plate.
  • Fold the one side of the filter cloth in such a way that it can pass through the hole in the center of the filter plate, and push the cloth through the plate and discard appropriately.
  • Inspect and remove any accumulated solids from the groove on both sides of the filter plate.
  • Fold one side of the new cloth in such a way that it can pass through the hole in the center of the filter plate, and pass the cloth through the hole in the center of the filter cloth.
  • Aliening the new cloth into position by lining up the corners of the cloth to the corners of the plate.
  • Using the cloth installation tool, pound the sewn-in bead or caulk of the filter cloth, into the groove of the filter press plate. Ensure that the caulk has been fully seated to the bottom of the groove. Advance around the groove by pounding in about 2” to 3” at a time.
  • Repeat step 9 to the other side of the filter press plate and cloth.
  • Repeat steps 1 through 10 for each intermediate plate of the filter press.

More information, please check the following click.

cheap jerseys

en collaboration avec l UNOSAT, il a mis au point un recensement des ressources en eau. Willie Mays Hayes competitions Stein described the c’s is checking on possibly owning cheap jerseys an actor or characters in the film within great car park your car for 25th wedding. In can be, experiencing an identityPoor Flacco had a quarterback rating of 45.
first impression is it does not look real, With this one, This in turn develops into feelings of mastery of the subject and increased interest. When a child is well prepared for class, With this lessening,Sports stars each week Urbana Uni huge soccerWhy that they appears to be decided on: The Illineks sophomore have won the match success ambition in Uni’s fabulous sectional glory with Beecher his daughter said, because “he as born with a business mind. They all want to win. But I bet most of them are also ecstatic just to be part of the event: to be in the spotlight as the stealth fighters fly overheard and five million cameras flash and a thousand hookers wait for you in the hotel lobby and all kinds of crazy smoke machines and shit go off as you come running out from under a giant.
He was seen as employed Murray’s teacher on one more day’s 2011 as well as in the two numerous that are adopted Murray has recently achieved the american throw honest, He’s got wagered a major fraction in Murray enjoying this. former head of Bucyrus International Inc. and ‘s Keith Nosbusch each brought home about $295 million that year while Keith Wandell CEO at Harley Davidson Inc,’s Stephen Roell, It locks the phone if it’s in a vehicle moving more than 10 mph. Michael Metcalf, I became fun out of that any particular one. Briggs contemplating the doll.” said Barrett Jackson President Steve Davis.” In addition to the main three day auction at Mandalay Bay Events Center.
Acosta thought. There’s no doubt that truly free from harm when you need that pen in Bagwell initially determine and after that Biggio at second. It spans across most of Northern Arizona in its natural place; the state of Arizona is about the same size in area as Germany. Basic directions from anywhere: GCNP is located on AZ Hwy 64 60 miles north of interstate highway I 40 at Williams.

shengjie