How to replace the screen line ？

Shaker accessories different locations, in the course plays an important role in terms of the rectangular line screen wherein the screen, the screen frame is linear shaker in the most easily damaged parts, then after the break, it is necessary to replace for the first time the use of linear vibrating screen customers to replace the time, there may be different issues and questions today, let Machinery Co., Ltd. of Xinxiang City, Belfast screening experts give you a detailed description of it! 1, the general linear shaker wooden screen has three custom wooden frame together to form, the system screen when the nail needs to be on the lower strips of wood and parted in the middle, before parting, to be marked above number (in order to avoid the wood sequence messing) 2, the upper and lower wood separated after a good spread in the wood-framed screen that you want to use to separate the wood frame wood layer according to the numbers marked with a sieve made nails, nail when the need to pay attention to the following points : a. must be prepared nail surface network (ie work network) box on the screen. b. In the nail system when the need to pad below the screen frame height of 200mm object used as bedding (highly consistent corners bedding), c. After the bedding was good, the need for the two intermediate position the total length of the screen frame is carried out under pressure, then the first set of a wooden frame, and then booked, then set the other end of the screen frame. After the two are booked, you need to sieve box below bedding material extraction, after taking out the tiling of the screen frame, screen frame has been stretched on the screen surface, at this time of an order from the wooden frame (in accordance with label No.) nail system until spout position. d. After this time nailed to the screen frame, in turn, in accordance with the nail noodle network method, the system needs to nail nail care network system, but before nail care system network, you need to add a rubber ball inside the screen frame to prevent the material in clogging the screen when using the port. If the number does not need to nail surface mesh made on schedule.